BTM/600/2100/B/G Heavy Duty Wheelie Bin Tipper
This Heavy Duty Wheelie Bin Tipper is designed to lift and tip a 660 Litre Wheelie Bin at a discharge height of 2100mm. The Heavy Duty Wheelie Bin Tipper is manufactured from mild steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is achieved by a 1” Simplex chain driven by a motor gearbox mounted at the top of the main column.
Safety Guard to BS EN 14120:2015 Safety of Machinery Guards
This Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm box section and 2.0mm sheet. The safety guard encloses the Heavy Duty Wheelie Bin Tipper to a height of 2200mm on three sides, with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the Heavy Duty Wheelie Bin Tipper from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.
Heavy Duty Wheelie Bin Tipper Electrical Control
This Heavy Duty Wheelie Bin Tipper is fitted with an IP65 Terminal Box which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control was incorporated into the Main Control System by others.
|