Show Keyboard Shortcuts

Pneumatic Bin Tipper

BTP/200/300/B/G

BTP/200/300/B/G

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Dolafs, Palletainers etc
  • Tip Heights up to 1500mm
  • Lifting Capacity - No Maximum
  • Hydraulic or Pneumatic Cylinders Complete with Hose Burst Fuses
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTP/200/300/B Pneumatic Bin Tipper

This Pneumatic Bin Tipper is designed to lift and tip a Bean Sprout Bin so that the edge of the bin in the tipped position is 300mm off the floor and the bin is tipped 10 degrees past the horizontal. At the full tip position, the lift carriage engaged with a support frame so that the bin is completely supported when a cleaner enters the bin to clean. The Pneumatic Bin Tipper is constructed from Grade 304 stainless steel, is a fully TIG welded construction throughout and was bolted to the floor. This Pneumatic Bin Tipper was powered pneumatically and the bin was tipped over by a pair of pneumatic cylinders to an angle of 10 degrees past the horizontal.

Pneumatic Bin Tipper Safety Guard

The Pneumatic Bin Tipper was supplied with fixed safety guarding at the back of the machine and both sides manufactured from 40 x 40 x 3mm stainless steel box section and 40mm aperture, 3mm stainless steel weld mesh. The guarding extended at the front such that when the bin was tipped over, it was still within the confines of the guard. The lift carriage was designed so that the bin was loaded from the front and retained with a latch. The operator stood outside of the safety guard at the front and operated the Pneumatic Bin Tipper on a ‘hold to run’ principle.

Pneumatic Bin Tipper Control

This Pneumatic Bin Tipper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The Pneumatic Bin Tipper has ‘dead man’s handle’ control such that the ‘Up’ or ‘Down’ pushbuttons must be held for the machine to operate. As soon as the button is released, the machine will stop.

Specification
Description Pneumatic Bin Tipper
Model No. BTP/200/300/B
Lifting Capacity 200Kgs
Tipping Height 300mm
Tipping Angle 100 Degrees
Machine Handing Right Hand
Container Description Bean Sprout Bin
Base Arrangement Bolted To The Floor
Application Story

You May Also Be interested In...

Customer image
Pneumatic Bin Washer
BTP/200/1000/B
Customer image
Hydraulic Box Tipper
BTH/300/900/B/G
Customer image
Hydraulic Drum Tipper
DTH/200/850/B
Customer image
Dolaf Bin Tipper
BTH/750/1100/B/G
Customer image
Guarded Bin Tipper
BTH/600/1000/B/G
Customer image
Mixing Bowl Tipper
BTH/500/1000/B
Customer image
Hydraulic Crate Tipper
BTH/500/800/B/G
Customer image
Hydraulic Tote Dumper
BTH/750/950/M
Customer image
Hydraulic Tote Bin Lift
BTH/300/1000/M
Customer image
Hydraulic Tipper
BTH/1000/1300/B/G
Customer image
Pneumatic Bin Tipper
BTP/200/300/B/G
Customer image
Hydraulic Bin Tipper
BTH/250/1200/B
Customer image
Pneumatic Bin Wash Tipper
BTP/75/900/B
Customer image
Hydraulic Dolav Bin Tipper
BTH/600/1500/B
Customer image
Hydraulic Trough Tipper
BTH/1000/1300/B/G-
Customer image
Bin Wash Tipper
BTP/75/900/B-
Customer image
Battery Operated Dump Buggy Tipper
BTH/300/1295/M/12V
Customer image
Bakery Bowl Lift
BTH/500/1000/B-
Customer image
Dolav Box Tipper
BTH/1500/1450/M/G
Customer image
Diosna Mixing Bowl Lift
BTH/500/1000/B--