Show Keyboard Shortcuts

Stainless Steel Screw Lift

HSS/250/626-2292/B

HSS/250/626-2292/B

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Bespoke Handling Systems & Solutions
  • Lift Heights – No Maximum
  • Lifting Capacity - No Maximum
  • Chain or Screw Driven, Hydraulic or Pneumatic
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

HHS/250/626-2292/B Stainless Steel Screw Lift

This Stainless Steel Screw Lift was designed to lift a stainless steel receiver hopper to a height of 2292mm from the floor and had a Safe Working Load of 250 Kgs. Once at this height, it can be rotated manually to the rear to allow an Intermediate Bulk Container to be loaded into position on a Floor Mounted Scale. After the IBC is loaded, the Receiver Hopper is rotated manually by the operator to align directly above the IBC for the filling activity to take place.

When an IBC is not in position, the Receiver Hopper can be lowered to the full down position which will be 626mm off the floor. At this full down position, the hopper can be manually rotated forwards towards the operator for further maintenance or hygiene access.

The Stainless Steel Screw Lift was constructed from Grade 304 stainless steel and was designed be bolted to the floor with an additional brace to the access platform. The lifting is accomplished via a machined ball screw and lifting nut mounted within the lift column driven by a motor gearbox.

Stainless Steel Screw Lift Electrical Control

This Stainless Steel Screw Lift is fitted with an IP65 Stainless Steel Control Panel which is mounted at a suitable position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The Stainless Steel Screw Lift has dual pushbutton control complete with simultaneous relays and works on a ‘hold to run’ basis The ‘Up’ or ‘Down’ pushbuttons must be held for the Stainless Steel Screw Lift to operate and as soon as a button is released, the Stainless Steel Screw Lift will stop. There is also an additional proximity switch used to detect the top of the Matcon IBC when the lift is lowered. When the proximity switch detects the top of the Matcon IBC, the Stainless Steel Screw Lift will stop and can only be raised from that position.

Specification
Description Stainless Steel Screw Lift
Model No. HHS/250/626-2292/B
Capacity 250 Kgs
Receiver Hopper Lowered 626mm
Receiver Hopper Raised 2292mm
Overall Height 3744mm
Machine Handing Left Hand
Maximum Headroom 3800mm
Container Description Vacuum Receiver Hopper
Base Arrangement Base Plate Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Dual Proximity Sensors
Motor Detail 1.1kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE
Gearbox Detail SEW Eurodrive
Ball Screw 32mm Diameter x 10mm Pitch
Lift Speed 4.0 Meters/Minute
Lift & Safety Nut 32mm x 20mm Pitch
Application Story

You May Also Be interested In...

Customer image
ATEX Drum Lift
SPL/250/4640/90º/B/G
Customer image
Single Column Screw Lift
PLM/125/2080/B
Customer image
Tote Bin Racking Lift
BLM/250/1875/M
Customer image
Screw Lift
BTM/150/2250/M
Customer image
Stainless Steel Butter Block Cutter
Customer image
Hygienic Screw Hoist
BLM/250/2448/B
Customer image
Reactor Drum Handling System
BHS/2P/1200/B/G
Customer image
Stainless Steel Screw Lift
HSS/250/626-2292/B
Customer image
Butter Cutter
PBC/400 x 300/B/Mixing Bowl