BTP/200/1000/B Pneumatic Bin Washer
This Pneumatic Bin Washer is designed to lift and tip your Stainless Steel Bins so that the edge of the bin in the tipped position is 1000mm off the floor and the bin is tipped 10 degrees past the horizontal. This will allow both the inside and the outside of the bin to be pressure washed. The Pneumatic Bin Washer is constructed from Grade 304 stainless steel, is a fully TIG welded construction throughout and would be bolted to the floor. This pneumatic bin washer would be powered pneumatically and the bin would be tipped over by a pair of pneumatic cylinders to an angle of 10 degrees past the horizontal.
Pneumatic Bin Washer Control
This Pneumatic Bin Washer is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main frame. The unguarded Pneumatic Bin Washer has ‘dead man’s handle’ control such that the ‘Up’ or ‘Down’ pushbuttons must be held for the pneumatic bin washer to operate. As soon as the button is released, the Pneumatic Bin Washer will stop.
|