Show Keyboard Shortcuts

Pallet Tipper

BTM/2P/1250/2800/B/G

BTM/2P/1250/2800/B/G

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Palletainers etc
  • Tip Heights up to Customers’ Requirements
  • Lifting Capacity - No Maximum
  • Chain Drive
  • Fully Enclosed Safety Guard
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTM/2P/1250/2800/B/G Double Pillar Pallet Tipper

This Double Pillar Pallet Tipper is designed to lift and tip a 1200 Kgs Palletainer (1250 x 1250mm x 1700mm High) at a discharge height of 2800mm. The Pallet Tipper is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 40mm aperture stainless steel weld mesh to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. It encloses the Pallet Tipper to a height of approximately 4000mm on three sides, with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the Pallet Tipper from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Pallet Tipper Electrical Control

This Pallet Tipper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the safety guard at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility. The Pallet Tipper operation is latched so that pressing the ‘Up’ push button once will raise the lift to the intermediate limit switch. Control will now transfer to a remote push button station. Once the product has been discharged, pressing the ‘Down’ push button will return the Pallet Tipper to the intermediate limit switch and once this is made it will continue under latched control to the bottom. The control panel has the facility for a ‘call to run’ signal to be connected if required.

Specification
Description 1250 Kgs Double Pillar Pallet Tipper
Model No. BTM/2P//1250/2800/B/G
Capacity 1250 Kgs
Tipping Height 2800mm
Tipping Angle 130 Degrees
Overall Height 5170mm
Machine Handing Right Hand
Maximum Headroom 6000mm
Tipping Chute Yes, Fitted To Lift Carriage
Container Description Palletainer
Base Arrangement Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Gearbox Detail SEW Eurodrive
Motor Detail 2.2kW, 415V, 3 PHASE, 50 CYCLE C/W BRAKE
Lift Chain 1" Simplex
Tensile Strength 6000 Kgs, 3000 Kgs
Tension Chain ¾” Simplex
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
Mobile Tote Bin Tipper
BTM/2P/350/2500/M/G
Customer image
Mixing Bowl Hoist
BTH/600/1100/B/G
Customer image
Tote Dumper
BTM/2P/600/5200/B/G
Customer image
Double Pillar Lifter
BTM/750/1800/B/G
Customer image
Heavy Duty Dumper
BTM/2P/1500/1000/B/G
Customer image
Pallet Tipper
BTM/2P/1250/2800/B/G
Customer image
Box Dumper
BTM/2P/1000/7010/B/G
Customer image
Tote Dumper Heavy Duty
BTM/2P/1200/1000/B/G
Customer image
Double Pillar Box Tipper
BTM/2P/600/1450/B/G
Customer image
Drum Tipper
BTM/2P/400/5600/B/G
Customer image
Tobacco Box Tipper
BTM/2P/250/6750/B/G
Customer image
Dolaf Box Tipper
BTM/2P/400/2800/B/G
Customer image
Pallet Box Tipper
BTM/2P/1000/5000/B/G
Customer image
Tote Dumper
BTM/2P/500/7600/B/G
Customer image
Double Pillar Tipper
BTM/2P/600/2100/M/G
Customer image
Double Pillar Dolaf Tipper
BTM/2P/600/1800/B/G
Customer image
Box Dumper
BTM/2P/300/2800/B/G
Customer image
Bakery Tub Elevator
BTM/2P/1350/6320/B/G
Customer image
Mixer Tub Elevator
BTM/2P/1800/1050/B/G
Customer image
Dough Tub Tipper
BTM/2P/1400/4285/B/G