Show Keyboard Shortcuts

Warehouse Lift

BTM/2P/1250/5530/B/G

BTM/2P/1250/5530/B/G

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Goods Lifts for Pallets, Bins, Drums etc
  • Lift Heights – No Maximum
  • Lifting Capacity - No Maximum
  • Chain Drive
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTM/2P/1250/5530/B/G Double Pillar Warehouse Lift

This Double Pillar Warehouse Lift has a Safe Working Load of 1250 Kgs and a lift height of 5530mm to the top of the pallet at the fully raised position. The lifting platform was big enough to allow a standard pallet (1200 x 1200 x 2200mm) to be loaded using a hand pallet truck. At the upper level, there was a hand rail over which the bags are unloaded. The Warehouse Lift was manufactured from Grade 316 stainless steel and was a welded construction throughout. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. The lift was made in two sections and was re-assembled on site.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

The safety guard is constructed from 40 x 40 x 3mm stainless steel Grade 316 box section and 1.5mm stainless steel Grade 316 sheet to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. At the upper level, the handrail over which the bags are unloaded was from box section and 2mm stainless steel sheet. This guard reached to a height of 960mm above the upper floor level, with a pair of hinged doors at the lower level through which the pallet is loaded. Each door is electrically interlocked to prevent the Warehouse Lift being operated with a door open and in addition, the doors are mechanically locked closed whilst the Warehouse Lift is running. Each door may only be opened when the lifting carriage is at the full down position

Warehouse Lift Electrical Control

This Warehouse Lift is fitted with an IP65 Stainless Steel Control Panel which is mounted on the safety guard at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop, Cleaning Key Switch and a Reset Facility. There will be a remote Grade 316 Stainless Steel push button station at the upper level incorporating the following controls; Up, Down, Guard Release and Emergency Stop. The Warehouse Lift operation is latched so that pressing the ‘Up’ push buttons once will raise the Warehouse Lift to an intermediate position.

Having made the intermediate limit switch, control of the lift will transfer to a remote push button station at the upper level. The control will now be on a hold to run principle allowing the operator at the upper level to inch the lift up and unloaded each layer of bags until the pallet is empty. The operator can then send the lift back to the full down position. There will be an Over Travel Limit Switch at the upper position to prevent the operator inadvertently driving the loaded pallet too high and against the roof cladding, similar to the existing system.

Warehouse Lift Safe Access System

This Safe Access System will be fitted to your Warehouse Lift during manufacture to allow access to the floor beneath the lift carriage for cleaning and maintenance. The Access System will operate as follows:-

  • The lift frame must be empty, at the full up position and the safety guard gate must be closed
  • At the full up position, the lift carriage is prevented from falling by a 50mm support bar driven out beneath the lift carriage using an electrical actuator (Not 316 stainless steel.)
  • As the bar is engaged, it will alter the state of 2 off separate safety limit switches
  • The one switch will disable the Warehouse Lift s safety circuit and relay
  • The second limit switch will allow the lower safety guard door to be opened providing that the Safe Access Key Switch has been operated
  • It is now safe to enter the lift enclosure for cleaning purposes with the Warehouse Lift disabled and the lift carriage supported
  • Once cleaning is complete, the above sequence is reversed
Specification
Description 1250 Kgs Double Pillar Warehouse Lift
Model No. BTM/2P/1250/5530/B/G
Capacity 1250 Kgs
Lift Height 5530mm
Overall Height 6407mm
Platform Size 1600 x 1400mm
Machine Handing Right Hand
Maximum Headroom 7000mm
Container Description 1200 x 1200 x 2200mm High Pallet
Base Arrangement Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Gearbox Detail SEW Eurodrive
Motor Detail 2.2kW, 415V, 3 PHASE, 50 CYCLE C/W BRAKE
Lift Chain 1" Simplex
Tensile Strength 12000 Kgs, 6000 Kgs
Tension Chain 1" Simplex
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
Platform Lift
PLM/500/1290/B/G
Customer image
Pallet Lift
PLM/2P/1000/3042/B/G
Customer image
Goods Lift
PLM/1500/7600/B/G
Customer image
Goods Elevator
PLM/2P/1000/3000/B/G
Customer image
Guarded Goods Lift
PLM/2P/1500/1210/B/G
Customer image
Trolley Lift
PLM/250/3360/B/G
Customer image
Mezzanine Floor Lift
PLM2P/1500/6570/B/G
Customer image
Guarded Platform Lift
PLM/500/2895/B/G
Customer image
Twin Pallet Lift
PLM/2P/1500/3300/B/G
Customer image
Euro Pallet Lift
PLM/2P/1000/4625/B/G
Customer image
Between Floor Lift
PLM/2P/1500/2850/B/G
Customer image
Guarded Pallet Lift
PLM/2P/1000/3160/B/G
Customer image
Warehouse Lift
BTM/2P/1250/5530/B/G
Customer image
Heavy Duty Pallet Lift
PLM/600/1720/B/G
Customer image
Food Standard Pallet Lift
PLM/2P/1000/1545/B/G
Customer image
ATEX Drum Elevator
PLM/500/2466-4944/B/G
Customer image
Tote Bin Platform Lift
PLM/400/1230/B
Customer image
Mezzanine Floor Lift
PLM/400/4500/B/G
Customer image
ATEX Platform Lift
PLM/2P/1250/2840/B/G/ATEX
Customer image
Stainless Steel Goods Lift
PLM/300/4140/B/G
Customer image
Stainless Steel Platform lift
PLM/300/1600/B/G
Customer image
Stainless Steel Pallet Lift
PLM/2P/1000/4210/B/G
Customer image
Eurobin Platform Lift
PLM/500/6740/B/G
Customer image
IBC Platform Lift
PLM/1000/5610/B/G
Customer image
Dolav Platform Lift
PLM/600/3900/B/G