Show Keyboard Shortcuts

Tobacco Box Tipper

BTM/2P/250/6750/B/G

BTM/2P/250/6750/B/G

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Palletainers etc
  • Tip Heights up to Customers’ Requirements
  • Lifting Capacity - No Maximum
  • Chain Drive
  • Fully Enclosed Safety Guard
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTM/2P/250/6750/B/G Double Pillar Tobacco Box Tipper

This Tobacco Box Tipper is designed to lift and tip a Tobacco Container (1175mm L x 989mm W x 990mm H) weighing 250 Kgs to tip 160° at a discharge height of 6750mm. The Tobacco Box Tipper is constructed from mild steel with a powder coated finish and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the bottom of the one column with a crossover shaft to the other column. The Tobacco Box Tipper had a maximum tip angle of 160 degrees. The lift and tip cycle was 95 seconds using an Inverter to accelerate the lift speed during the vertical parts of the travel both up and down.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

This Tobacco Box Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm box section and 40 x 40mm aperture, 3mm wire weld mesh which encloses the Tobacco Box Tipper to a height of 7200mm on three sides and 6000mm at the tipping position. At the loading position there was a side guard each side and a Safety Light Barrier.

Tobacco Box Tipper Electrical Control

This Tobacco Box Tipper is fitted with an IP65 Control Panel which is mounted on the Safety Guard at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control panel incorporated the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility. Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

Once a bin was loaded and the Start operated, the Tobacco Box Tipper cycle was automatic lifting to the Intermediate Limit Switch position. The rest of the tipping action was controlled by a ‘call to run’ signal from the master control system. If the tipper was receiving a ‘call to run’ signal when it reached the Intermediate Limit Switch position, it continued to the Full Up position and paused at full up for an Engineer adjustable time. Once the product had been discharged, and the pause time expired, the Tobacco Box Tipper returned to the Full Down position. The control panel has a volt free pair of contacts which is used to connect the ‘Call to Run’ signal.

Specification
Description 250 Kgs Double Pillar Tobacco Box
Model No. BTM/2P/250/6750/B/G
Capacity 250 Kgs
Tipping Height 6750mm
Tipping Angle 160° Maximum
Overall Height 8526mm
Machine Handing Right Hand
Maximum Headroom 8750mm
Tipping Chute Yes, Fitted To Lift Carriage
Container Description Tobacco Box (1175 x 989 x 990mm High)
Base Arrangement Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Motor Detail 1.5kw, 415V, 3 PHASE, 50 CYCLE C/W BRAKE
Gearbox Detail SEW Eurodrive
Lift Chain 2” Simplex
Tensile Strength 25000 Kgs Per Chain
Lift Speed Adjustable Via Inverter To Give
Application Story

You May Also Be interested In...

Customer image
Mobile Tote Bin Tipper
BTM/2P/350/2500/M/G
Customer image
Mixing Bowl Hoist
BTH/600/1100/B/G
Customer image
Tote Dumper
BTM/2P/600/5200/B/G
Customer image
Double Pillar Lifter
BTM/750/1800/B/G
Customer image
Heavy Duty Dumper
BTM/2P/1500/1000/B/G
Customer image
Pallet Tipper
BTM/2P/1250/2800/B/G
Customer image
Box Dumper
BTM/2P/1000/7010/B/G
Customer image
Tote Dumper Heavy Duty
BTM/2P/1200/1000/B/G
Customer image
Double Pillar Box Tipper
BTM/2P/600/1450/B/G
Customer image
Drum Tipper
BTM/2P/400/5600/B/G
Customer image
Tobacco Box Tipper
BTM/2P/250/6750/B/G
Customer image
Dolaf Box Tipper
BTM/2P/400/2800/B/G
Customer image
Pallet Box Tipper
BTM/2P/1000/5000/B/G
Customer image
Tote Dumper
BTM/2P/500/7600/B/G
Customer image
Double Pillar Tipper
BTM/2P/600/2100/M/G
Customer image
Double Pillar Dolaf Tipper
BTM/2P/600/1800/B/G
Customer image
Box Dumper
BTM/2P/300/2800/B/G
Customer image
Bakery Tub Elevator
BTM/2P/1350/6320/B/G
Customer image
Mixer Tub Elevator
BTM/2P/1800/1050/B/G
Customer image
Dough Tub Tipper
BTM/2P/1400/4285/B/G