Show Keyboard Shortcuts

Mixing Bowl Tipper

BTH/500/1000/B

BTH/500/1000/B

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Dolafs, Palletainers etc
  • Tip Heights up to 2000mm
  • Lifting Capacity - No Maximum
  • Hydraulic or Pneumatic Cylinders Complete with Hose Burst Fuses
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTH/500/1000/B Hydraulic Mixing Bowl Tipper

This Mixing Bowl Tipper is designed to lift and tip a large mixing bowl at a discharge height of 1000mm. The Mixing Bowl Tipper is constructed from Grade 304 stainless steel, is a TIG welded construction throughout and would be bolted to the floor. This Mixing Bowl Tipper was powered via a hydraulic powerpack and tipped the containers by the extension of a pair of stainless steel hydraulic cylinders to an angle of 30 degrees past the horizontal. The hydraulic cylinders are fitted with a safety check valve such that even in the unlikely event of a hydraulic hose failure, the raised bin will not fall to the floor.

Mixing Bowl Tipper Electrical Control

This Mixing Bowl Tipper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main frame at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The control panel incorporates dual UP and DOWN pushbuttons with a simultaneous control relay for each operation. The Mixing Bowl Tipper operation is based on a ‘hold to run’ principle such that either both ‘Up’ or ‘Down’ pushbuttons must be held for the Mixing Bowl Tipper to operate, as soon as a button is released, the Mixing Bowl Tipper will stop. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Specification
Description Hydraulic Mixing Bowl Tipper
Model No. BTH/500/1000/B
Lifting Capacity 500 Kgs
Tipping Height 1000mm
Tipping Angle 120 Degrees
Machine Handing Right Hand
Tipping Chute Yes, Fitted To Lift Carriage
Container Description Diosna And Kempa Mixing Bowls
Base Arrangement Bolted To The Floor
Powerpack 0.75kW, 415V, 3 PHASE, 50 CYCLE
Control Circuit 24Vac
Electrical Rating IP65
Application Story

You May Also Be interested In...

Customer image
Pneumatic Bin Washer
BTP/200/1000/B
Customer image
Hydraulic Box Tipper
BTH/300/900/B/G
Customer image
Hydraulic Drum Tipper
DTH/200/850/B
Customer image
Dolaf Bin Tipper
BTH/750/1100/B/G
Customer image
Guarded Bin Tipper
BTH/600/1000/B/G
Customer image
Mixing Bowl Tipper
BTH/500/1000/B
Customer image
Hydraulic Crate Tipper
BTH/500/800/B/G
Customer image
Hydraulic Tote Dumper
BTH/750/950/M
Customer image
Hydraulic Tote Bin Lift
BTH/300/1000/M
Customer image
Hydraulic Tipper
BTH/1000/1300/B/G
Customer image
Pneumatic Bin Tipper
BTP/200/300/B/G
Customer image
Hydraulic Bin Tipper
BTH/250/1200/B
Customer image
Pneumatic Bin Wash Tipper
BTP/75/900/B
Customer image
Hydraulic Dolav Bin Tipper
BTH/600/1500/B
Customer image
Hydraulic Trough Tipper
BTH/1000/1300/B/G-
Customer image
Bin Wash Tipper
BTP/75/900/B-
Customer image
Battery Operated Dump Buggy Tipper
BTH/300/1295/M/12V
Customer image
Bakery Bowl Lift
BTH/500/1000/B-
Customer image
Dolav Box Tipper
BTH/1500/1450/M/G
Customer image
Diosna Mixing Bowl Lift
BTH/500/1000/B--