Show Keyboard Shortcuts

Screw Lift

BTM/150/2250/M

BTM/150/2250/M

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Bespoke Handling Systems & Solutions
  • Lift Heights – No Maximum
  • Lifting Capacity - No Maximum
  • Chain or Screw Driven, Hydraulic or Pneumatic
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTM/150/2250/M Single Pillar Screw Lift

This Screw Lift is designed to lift vertically a Dinex Drum from a low level loading position to a height of 2250mm. The Screw Lift was manufactured from Grade 304 stainless steel and is a welded construction throughout. The lifting is achieved by a ball screw driven by a motor gearbox mounted at the top of the main column. The Armoloy coated ball screw and other column internals were covered from sight by a PU belt to aid cleaning. The Screw Lift was a mobile version to allow access within the process room for cleaning. The Screw Lift also incorporated a load arrestor mechanism, which prevents the load from falling to the floor in the event of a ball screw failure. The Load arrestor was mild steel, but encased in a stainless steel housing.

Screw Lift Electrical Control

This Screw Lift is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The Screw Lift has ‘hold to run’ control such that the ‘Up’ or ‘Down’ pushbuttons must be held for the Screw Lift to operate. As soon as the button is released, the Screw Lift will stop. The control panel has the facility for a ‘Call to Run’ signal to be connected if required.

Specification
Description Single Pillar Screw Lift
Model No. BTM/150/2250/M
Capacity 150 Kgs
Lift Height 2250mm
Tipping Angle Vertical Lift Only
Overall Height 2780mm
Machine Handing Column At Rear With Control Panel
Maximum Headroom 3000mm
Container Description Dinex Vessel
Base Arrangement Mobile On 4 x Swivel/Brake Castors
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Motor Detail 0.55kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE
Gearbox Detail SEW OS4 - COATING IP65
Output R.P.M 28 R.P.M.
Ratio 50:1
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
ATEX Drum Lift
SPL/250/4640/90º/B/G
Customer image
Single Column Screw Lift
PLM/125/2080/B
Customer image
Tote Bin Racking Lift
BLM/250/1875/M
Customer image
Screw Lift
BTM/150/2250/M
Customer image
Stainless Steel Butter Block Cutter
Customer image
Hygienic Screw Hoist
BLM/250/2448/B
Customer image
Reactor Drum Handling System
BHS/2P/1200/B/G
Customer image
Stainless Steel Screw Lift
HSS/250/626-2292/B
Customer image
Butter Cutter
PBC/400 x 300/B/Mixing Bowl